Three (3) Hufcor series 5260 Floor Supported partitions were installed with pass doors with concealed closers, and inset panic bar exit hardware. Additional track was installed to allow the partitions to divide the room in half, or in a 60/40 layout. Panels are stacked in an open storage area in the corner of the Banquet Hall. A transfer track runs the complete width of the storage area allowing panels to be placed across the front of the area to conceal the panels when they are not in use.

Hufcor series 5660R panels are used in the area adjacent to the balcony. Two panels have pass doors with a concealed closer. One of the pass door panels has a notched leading edge allowing it to seal against the gypsum board soffit and the face of the series 5260 floor supported panels.

One partition consists of Hufcor PCS portable panels. This partition is positioned under a cantilevered platform area in the Banquet Room. The floor-supported PCS panels were selected because the cantilevered platform does not provide the support required for the overhead track transfer system utilized for the series 5260 floor supported panels.

When the partitions are in place, the large banquet room is converted to multi-use meeting and function room space. Hufcor partitions allow the owner to sell multiple spaces with corridor access to each area without disruption to the other users. This gives the owner the flexiblility he needs while meeting the occupancy codes for the space.